PRODUCTS

Home » Products » ETFE » Granule » Extrudion&Injection grade ETFE YT106

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Extrudion&Injection grade ETFE YT106

Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials. ETFE can be produced in two forms: powder and pellet, and processed by electrostatic powder coating or rotomolding, extrusion molding, injection molding, etc. Moulding parts include lining, thin film, tube, wires, etc. and can be widely applied in chemical industry, agriculture, architecture, electronics, automobile, military, aerospace, nuclear industry and so on.
Availability:
Quantity:
Product Description

1. Product Description

Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials. ETFE can be produced in two forms: powder and pellet, and processed by electrostatic powder coating or rotomolding, extrusion molding, injection molding, etc. Moulding parts include lining, thin film, tube, wires, etc. and can be widely applied in chemical industry, agriculture, architecture, electronics, automobile, military, aerospace, nuclear industry and so on.


2. Product Index

ItemYT106
AppearanceWhite translucent particles
MFR(372℃、5kg),g/10min24.1-30.0
Tensile Strength(23℃),MPa  ≥30
Elongation at break(23℃), ≥300
Relative density(25℃)1.70-1.82
Flexural Modulus Mpa80-1000
Flexural Strength Mpa20-30
Impact Strength Ft-lb/inno break
Hardness Shore D ≥50
Oxygen Index % ≥32
Melting point,℃220-270
Flammability UL94V-0
Dielectric constant, 106Hz ,≤2.4
Dielectric Loss,106Hz0.008


3. Main Application

YT106:Mainly for cable insulation, injection molded parts, pipes, plates, films.


4. Package, transportation and storage

ETFE pellet product ,Single layer bag, 25Kg/bag


5. Cautions

1. When dealing with ETFE powder for deep processing, operators must wear protective cloth and mask to avoid potential safety hazards, such as inhalation of toxic gas, or hurt by high temperature. No open flame and smoking in workplace. Exhaust devices should be installed.

2. Once opened, unused product should be repacked to avoid any dust or contamination.

3. The product should be stored in cool ventilated place and away from fire source and heat source.

4. It should also be prevented against sunlight and moisture, kept in upright position and handled with great care.

5. Product waste must be handled properly following local laws and regulations.

Previous: 
Next: 

APPLICATION INDUSTRY

Aerospace
Semiconductor
Photovoltaic
Energy Storage
Architectural field
Medical instrument
 

PRODUCT CATEGORY

CONTACT INFO

 +86-27-84881488
  carl@wh-fty.com
 Floor 24, Times Square, Longyang Avenue Hanyang District, Wuhan City, Hubei Province, China

WELCOME TO VISIT

Factory: Chibi Yuntian New Material Technology Co., Ltd (ISO9001 / ISO14001)

Address: Chibi High-tech zone, Xianning, Hubei, China
 
 
Copyrights 2023 Wuhan Feitengya Chemical New Material Co., Ltd. 丨 鄂ICP备2023009058号-1 丨 Technology by leadong.com 丨 Sitemap