- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
1. Product Description
Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials. ETFE can be produced in two forms: powder and pellet, and processed by electrostatic powder coating or rotomolding, extrusion molding, injection molding, etc. Moulding parts include lining, thin film, tube, wires, etc. and can be widely applied in chemical industry, agriculture, architecture, electronics, automobile, military, aerospace, nuclear industry and so on.
2. Product Index
| Item | YT105 |
| Appearance | White translucent particles |
| MFR（372℃、5kg），g/10min | 16.1-24.0 |
| Tensile Strength（23℃），MPa ≥ | 30 |
| Elongation at break（23℃）， ≥ | 300 |
| Relative density（25℃） | 1.70-1.82 |
| Flexural Modulus Mpa | 80-1000 |
| Flexural Strength Mpa | 20-30 |
| Impact Strength Ft-lb/in | no break |
| Hardness Shore D ≥ | 50 |
| Oxygen Index % ≥ | 32 |
| Melting point，℃ | 220-270 |
| Flammability UL94 | V-0 |
| Dielectric constant， 106Hz ，≤ | 2.4 |
| Dielectric Loss，106Hz | 0.008 |
3. Main Application
YT105：Mainly for cable insulation, injection molded parts, pipes, plates, films.
4. Package, transportation and storage
ETFE pellet product ,Single layer bag, 25Kg/bag
5. Cautions
1. When dealing with ETFE powder for deep processing, operators must wear protective cloth and mask to avoid potential safety hazards, such as inhalation of toxic gas, or hurt by high temperature. No open flame and smoking in workplace. Exhaust devices should be installed.
2. Once opened, unused product should be repacked to avoid any dust or contamination.
3. The product should be stored in cool ventilated place and away from fire source and heat source.
4. It should also be prevented against sunlight and moisture, kept in upright position and handled with great care.
5. Product waste must be handled properly following local laws and regulations.
